Multi-compartment tank MS-MO

Standard accessories

Upper tank compartment

• The volume of the upper tank compartment corresponds with a standard tank size
• Vaulted, stable tank top
• Tank up to ø of 2,000 mm with integrally moulded forward up-slope for complete filling and ventilation assuring a very small air contact area
• From tank-ø of 2,200 mm upwards welded-on connection neck located in top centre with filling and vent neck AG NW 50 Rd 78 x 1/6"
• With lifting lugs
• From 2,000 mm tank height upwards with ladder safety bow
• Vaulted, stable inserted bottom
• Up to tank-ø of 2,000 mm with integrally moulded forward down-slope for complete draining moulded connection neck, impending suction effect with bottom outlet neck NW 50 DIN 11851
• From tank-ø of 2,200 mm upwards with dis­charge cup located in the centre of the tank’s bottom and forward drawn discharge pipe, outlet with thread NW 50 DIN 11851

Middle tank compartment

• Inserted bottom of the upper tank compartment with filling and vent neck external thread NW 50 Rd 78 x 1/6" for complete filling and ventilation
• Vaulted, stable inserted bottom
• Up to tank-ø of 2,000 mm with integrally moulded forward down-slope for complete draining moulded connection neck, impending suction effect with bottom outlet neck NW 50 DIN 11851
• From tank-ø of 2,200 mm upwards with dis­charge cup located in the centre of the tank’s bottom and forward drawn discharge pipe, outlet with thread NW 50 DIN 11851

Lower tank compartment

• Inserted bottom of the upper respectively middle tank compartment with filling and ventilation neck NW 50 Rd 78 x 1/6" for complete filling and vent
• Vaulted, stable tank bottom
• Up to tank-ø of 2,000 mm with integrally moulded forward down-slope for complete draining
• Moulded connection neck, impending suction effect with bottom outlet neck NW 50 DIN 11851
• From tank-ø of 2,200 mm upwards with dis­charge cup located in the centre of the tank’s bottom and forward drawn discharge pipe, outlet with thread NW 50 DIN 11851
• Free-standing on welded-on box-shaped legs – perfect stability and force transmission into the tank shell

Standard equipment per tank compartment

• Sampling: welded-on thread NW 10 DIN 11851 with sealing cap (for the installation of sampling tap)
• Stable manhole neck seamlessly moulded from the tank shell, 420 x 320 mm, door with butterfly bow and hand wheel
• Racking outlet: Reinforcing plate with drilled hole 48 mm ø (to hold flap valve Gr. 37 or weld-on thread NW 40, NW 50 DIN 11851)
• Fill level: Weld-on thread NW 10 DIN 11851 with sealing cap including fastening points on tank shell (for the installation of fill level indicator)